Español   Français   Português 

RF Generators: Frequency & Noise

Picture Condition Description
Applied Instruments 6103 Reconditioned

Applied Instruments 6103 "HECTER"

Return Path Test Head-End Transceiver

  • Two inbound signal level receivers
  • Telemetry outbound transmitter
  • Reports signal levels of both carriers as received in the HE to the field unit
  • Enables a single technician to perform return band alignment

Includes: AC Power cord and Manual

Applied Instruments 6106 Reconditioned

Applied Instruments 6106 "HECTER PUP"

Return Path Test Field Unit

  • Two carrier return generator
  • Telemetry receiver with dual digital readout of amplitudes received at the headend
  • Compact, rugged, field portable

Includes: Charger and Manual

Applied Instruments NS-1 RF Noise Generator NEW

 

Applied Instruments NS-1

Handheld Noise Generator

  • Frequency Range: 1 - 2000 MHz
  • Output Level: -113.52 dBm/Hz
    • Approx +21 dBmV @ 6MHz
    • Approx + 12 dBmV @ 280 kHz
  • Field replaceable "F" Connector
  • Signal drops out w/low battery (No sagging)
  • Battery Usage - 15 hours continuous use
Applied Instruments NS-3 RF Noise Generator NEW

 

Applied Instruments NS-3

Bench-top Noise Generator

  • 5MHz - 2.15GHz RF Noise Generator
  • Output Level: -120 to -90 dBm/Hz
    • Approx +26dBmV @ 5.2 MHz
    • Approx +13 dBmV @ 280 kHz
  • Level adjust: 30 dB in 0.1 dB steps
  • 75 ohm impedance
  • On/Off modulation in (3) selectable rates
  • Remote control via RS232
Applied Instruments NS-3 RF Noise Generator RECONDITIONED

 

Applied Instruments NS-3

Bench-top Noise Generator

  • 5MHz - 2.15GHz RF Noise Generator
  • Output Level: -120 to -90 dBm/Hz
    • Approx +26dBmV @ 5.2 MHz
    • Approx +13 dBmV @ 280 kHz
  • Level adjust: 30 dB in 0.1 dB steps
  • 75 ohm impedance
  • On/Off modulation in (3) selectable rates
  • Remote control via RS232
            Applied Instruments PC-2X NEW

Applied Instruments PC-2X

Tunable Two-Carrier CW Signal Generator

  • Channel 1: 5 to 50 MHz
  • Channel 2: 50 to 204 MHz
  • Adjusted in 5 kHz increments
  • Maximum Output: +50 dBmV

Includes: AC Charger

            Deviser DS5200 NEW

Deviser DS5200

QAM Source Generator

  • 5 - 120 MHz, 75 ohm
  • F or BNC Connector
  • 512 KB memory for parameter setup
  • Multi-Function: RF, Pulse & Sweep

Includes: Battery, Charger and User Instrructions

            XFTP RSVP2 Return Path Signal Generator Reconditioned 

 

Trilithic RSVP2

Return Path Tester

When unit is in "Source Mode":

  • Selectable output frequency: 5-42MHz
  • Selectable output level:+20 to +55 dB in 1 dB steps

Includes: Padded Holster, Charger and Manual

Micco Technologies, Affordable Test and Power Products